The Skyjack SJ6832 RTE instrument cluster provides essential operator feedback through a set of warning indicators. Understanding these lights is crucial for safe and efficient operation of this rough terrain aerial lift. This guide covers all genuine indicators for the SJ6832 RTE model.
Skyjack SJ6832 RTE Warning Light Symbols
| Symbol | Name | Color | What it means | What to do |
|---|---|---|---|---|
| Battery Discharge | RED | Indicates battery charge is critically low; the SJ6832 RTE may soon lose electrical power for driving and lifting functions. | Immediately lower platform and drive to a safe area, then charge batteries per manual. | |
| Hydraulic Oil | AMBER | Warns of low hydraulic oil level or high oil temperature in the SJ6832 RTE's hydraulic system, affecting lift and drive performance. | Check hydraulic oil level and condition, add oil if low, or allow system to cool. | |
| Overload | RED | The platform load exceeds the safe working capacity of the SJ6832 RTE; lift and drive functions may be disabled. | Remove excess weight immediately and redistribute load evenly before resuming operation. | |
| Mast / Lift Limit | AMBER | Indicates the mast or lift mechanism has reached its travel limit or a fault exists in the SJ6832 RTE's raising/lowering system. | Lower platform slightly and check for obstructions; if light persists, contact service. | |
| Fasten Seat Belt | RED | The operator's seat belt is not fastened; the SJ6832 RTE requires the belt to be fastened for safe operation. | Fasten your seat belt before moving the machine. | |
| Parking Brake | AMBER | Warns that the parking brake is engaged or not fully released on the SJ6832 RTE, which may affect drive functions. | Ensure parking brake is fully released before driving; if light stays on, check brake system. | |
| Beacon / Rotating Light | GREEN | The rotating beacon is activated to warn nearby personnel that the SJ6832 RTE is in motion or operating. | No action required; the beacon is working as intended for safety. | |
| Work Lights | GREEN | The work lights are turned on for improved visibility during operations of the SJ6832 RTE in low-light conditions. | No action required; lights are on; switch off when not needed to save battery. | |
| Service / Hour Meter | AMBER | Indicates that scheduled maintenance of the SJ6832 RTE is due based on engine or operating hours. | Perform the next service interval as specified in the operator manual (e.g., oil change, filter check). | |
| Brake System | RED | A problem in the brake system of the SJ6832 RTE has been detected, such as low brake fluid or brake pad wear. | Stop the machine immediately and inspect brake fluid level and components; do not operate until repaired. |
10 symbols shown. Icons follow ISO 2575 dashboard standards; exact graphics vary by model year.
Most Important Warning Lights
Overload
Common causes
- Platform load exceeds rated capacity
- Uneven load distribution
- Operator error
What to do
Remove weight until within capacity and redistribute evenly. The SJ6832 RTE's overload system will reset when safe load is restored.
Battery Discharge
Common causes
- Low battery charge
- Faulty charging system
- Excessive electrical load
What to do
Charge the batteries fully before next use. If light persists, inspect charger connections and battery condition on your SJ6832 RTE.
Hydraulic System Failure
Common causes
- Low hydraulic oil level
- Hydraulic oil overheating
- Contaminated oil or filter
What to do
Check and top off hydraulic oil with recommended fluid. Allow system to cool and check for leaks. Replace filter if needed per SJ6832 RTE manual.
Brake System Malfunction
Common causes
- Low brake fluid level
- Worn brake pads
- Brake line leak
What to do
Inspect brake fluid reservoir and top off if low. If warning persists, have brakes serviced immediately. Do not operate the SJ6832 RTE.
Frequently Asked Questions
What should I do if the Battery Discharge light comes on while operating the SJ6832 RTE?
Lower the platform safely, drive to a level charge area, and plug in the charger. Recharge fully before resuming use.
The Overload light is flashing but my load seems within limits. What could be wrong?
Check for uneven load distribution or an object caught on the platform. The SJ6832 RTE sensors may also need recalibration; consult the service manual.
Why is my Hydraulic Oil warning light on intermittently?
Intermittent warnings often indicate low oil level when the SJ6832 RTE is tilted or during heavy use. Check oil level on level ground and add if needed.
How do I reset the Service Hour Meter reminder on the SJ6832 RTE?
The hour meter resets only after performing the required service. Follow the maintenance procedure in the manual; the indicator will clear automatically.
Can I operate the SJ6832 RTE with the Parking Brake light on?
No, the parking brake should be fully released. If the light stays on, the brake may be stuck or faulty. Check manually and contact service.
What does the Mast/Lift Limit amber light mean?
It means the platform has reached its maximum height or an obstacle is preventing smooth movement. Lower slightly to clear the limit and inspect the mast area.