The Haulotte HA61 LE is a hybrid scissor lift that combines a diesel engine with electric drive for extended runtime and reduced emissions. This dashboard guide covers the specific warning indicators and symbols you'll encounter while operating this model.
Haulotte HA61 LE Warning Light Symbols
| Symbol | Name | Color | What it means | What to do |
|---|---|---|---|---|
| Master Warning (Stop) | RED | A critical fault has occurred on your HA61 LE that requires immediate machine shutdown to prevent damage or injury. | Stop all operations, shut down the engine, and contact Haulotte service. | |
| Master Caution | AMBER | A non-critical system warning is active on your HA61 LE; check the display for more information. | Refer to the on-board display for the specific alert and schedule service if needed. | |
| Check Engine (MIL) | AMBER | The engine control system on your HA61 LE has detected a malfunction that could affect emissions or performance. | Reduce load and continue operation if safe; have the engine diagnosed promptly. | |
| Engine Oil Pressure | RED | Oil pressure in the HA61 LE's diesel engine has dropped below safe levels, risking engine damage. | Stop the engine immediately and check oil level before restarting. | |
| Battery / Charging | AMBER | The electrical charging system for your HA61 LE's hybrid batteries is not functioning correctly. | Check battery connections and alternator; if persistent, service is needed. | |
| Coolant Temperature | RED | The engine coolant temperature on your HA61 LE has exceeded the safe operating range. | Stop the engine and allow it to cool; inspect coolant level and cooling system. | |
| Hydraulic System | RED | A fault in the hydraulic system of your HA61 LE, such as low pressure or high temperature, has been detected. | Stop lift operations and inspect hydraulic fluid level and leaks. | |
| Overload / Capacity | RED | The platform load on your HA61 LE has exceeded the rated capacity, triggering a safety shutdown. | Remove excess load immediately; no further lifting until load is within limits. | |
| Mast / Lift Limit | AMBER | The mast height or extension on your HA61 LE has reached its maximum safe limit. | Do not attempt to raise or extend further; lower slightly to clear the limit. | |
| Seat Belt | RED | The operator's seat belt in the HA61 LE is not fastened; the machine will not operate until it is secure. | Fasten your seat belt before operating the machine. | |
| Parking Brake | AMBER | The parking brake on your HA61 LE is engaged or there is a fault in the brake system. | Release the parking brake before driving; if light remains, check brake system. | |
| Glow Plug / Preheat | AMBER | The glow plugs are heating the engine cylinders on your HA61 LE for cold start assistance. | Wait for the light to turn off before starting the engine. | |
| Low Fuel | AMBER | The diesel fuel level in your HA61 LE is low and needs refilling soon to avoid engine stall. | Refill the diesel tank as soon as possible. | |
| Water in Fuel | AMBER | Water has been detected in the diesel fuel system of your HA61 LE, which can damage the engine. | Drain the fuel/water separator and have the system inspected. | |
| Service / Hour Meter | AMBER | Scheduled maintenance is due on your HA61 LE based on engine hours or service interval. | Perform the required maintenance as per the owner's manual. | |
| Work Lights | GREEN | The work lights on your HA61 LE are currently turned on for improved visibility. | No action needed; turn off when not required to save battery. | |
| Beacon / Rotating Light | AMBER | The rotating beacon on your HA61 LE is active, indicating the machine is in operation. | Ensure the beacon is working before use; it's a safety requirement. | |
| Battery Discharge (BDI) | AMBER | The hybrid battery charge level on your HA61 LE is low and needs recharging soon. | Charge the batteries as soon as possible to avoid power loss. | |
| Door Open | AMBER | A compartment door on your HA61 LE is open, possibly affecting operation safety. | Close all doors and panels before operating the machine. | |
| Low Oil Level | AMBER | The engine oil level in your HA61 LE is below the minimum safe level. | Check and top up engine oil to the correct level. | |
| Brake Fluid Level | RED | Brake fluid level in your HA61 LE is too low, compromising braking performance. | Inspect brake fluid reservoir and top up if safe; otherwise seek service. | |
| Reduced Power (Limp Mode) | AMBER | The HA61 LE has entered a reduced power mode to protect the system from damage. | Reduce load and drive to a safe location; contact service for diagnosis. |
22 symbols shown. Icons follow ISO 2575 dashboard standards; exact graphics vary by model year.
Most Important Warning Lights
Overload Warning
Common causes
- Platform load exceeds rated capacity
- Uneven load distribution
- Faulty load sensor
What to do
Immediately remove excess weight from the platform. For your HA61 LE, ensure the load is centered and within the 500 kg capacity. If the warning persists, have the load sensing system inspected by a Haulotte technician.
Engine Shutdown (Low Oil Pressure)
Common causes
- Low engine oil level
- Oil pump failure
- Clogged oil filter
What to do
Stop the HA61 LE engine instantly. Check the oil dipstick and add oil if low. If oil level is fine, do not restart; contact Haulotte service to avoid engine seizure.
Hydraulic System Failure
Common causes
- Low hydraulic fluid level
- Hydraulic oil leak
- Overheated hydraulic oil
What to do
Cease all lift and drive operations. Inspect the hydraulic reservoir on your HA61 LE and top up with the recommended fluid. If the temperature is high, allow the system to cool before resuming. Look for visible leaks and repair.
Battery Discharge (BDI) Critical
Common causes
- Hybrid battery depleted
- Charging system malfunction
- Extended auxiliary load usage
What to do
Recharge the batteries immediately using the onboard charger. For the HA61 LE, avoid operating with the battery icon flashing red, as it may cause system shutdown. If battery does not hold charge, have the battery pack tested.
Coolant Overheating
Common causes
- Low coolant level
- Radiator blockage
- Cooling fan failure
What to do
Shut down the engine and let it cool. Check the coolant reservoir on your HA61 LE; add coolant if low. Clean debris from the radiator fins. If the fan is not spinning, contact service.
Frequently Asked Questions
Why does my HA61 LE show a red master warning light but no other indicators?
The master warning light on the HA61 LE indicates a fault that requires immediate attention. Check the onboard display for a specific error code, as it could be a safety interlock, tilt alarm, or communication error. If no code appears, contact Haulotte support.
How do I reset the service hour meter on my HA61 LE?
The service hour reminder on the HA61 LE can only be reset by a certified technician after completing the required maintenance. Do not attempt to reset it yourself, as it may void warranty or neglect crucial services.
Can I operate my HA61 LE if the amber master caution light is on?
Yes, you may continue operation with the amber master caution light on your HA61 LE, but you should check the display for the specific warning and address it at the next opportunity. If the light turns red, stop immediately.
What does it mean when the glow plug light stays on after starting?
If the glow plug indicator on your HA61 LE remains lit after the engine starts, it indicates a fault in the preheat system. Have the glow plugs and relay checked by a Haulotte dealer to ensure reliable cold starting.
Why is my HA61 LE’s overload light flashing even with a light load?
A flashing overload light on the HA61 LE suggests a sensor calibration issue or a faulty load cell. First, ensure the platform is clear of debris and the load is centered. If it persists, the system may need recalibration by a service technician.
How often should I check the hydraulic oil level on my HA61 LE?
For the HA61 LE, check the hydraulic oil level daily before operation. Low oil can cause system overheating and component damage. Use only Haulotte-approved hydraulic fluid and refill to the full mark on the sight glass.